Inicio
Compañía
Productos
LOGIN
▶

X

Username: Password:
Do you want to change your password?
Login and click "change password" in main menu, top right.

Forgot your password?
Forgot your username and password?

X

« Go Back

Username:

X

« Go Back

Email:

X

Wrong Username

X

« Go Back

Wrond Email

WORKSHOP CRIMPERS

HM 375

LxWxH: 1600x600x1600 mm

	HM 375
Crimp force (kN / Ton)	3150 / 315
No grease: 20 % less friction
Control	Control B + Touch
SAE R 15 / 4SH* - 1 piece	3“
SAE R 15 / 4SH* - 2 piece	3“
Industrial	4” (6”)**
90° Elbows	3”
Crimp range	161 mm
Opening	+70 mm
Opening without dies	215 mm
Type of dies	239 L / 237 L
Speed (mm/sec.)	Close: 23 mm/sec. Crimp: 1,4 mm/sec. Open: 33 mm/sec.
Noise level	62 dBA
Drive	4 kW
Oil	100 l
Weight	750 kg
CGS (Conicity Guard System)
HiDS (High Pressure Pump Dynamic Suction)

Type of dies	239 L 237 L ***
Ø mm	mm
6,8	40
9	70
12	70
14	70
16	70
17	70
19	70
20	70
22	70
24	70
26	70
28	85
32	85
36	85
40	85
44	85
47	110
50	110
54	110 / 118
57	110 / 118
62	110 / 118
67	118
71	118
74	118
78	118
84	118
86	118
90	118
96	118
103	118
106	126
111	126
116	126
121	126
126	126
131	126

HM 3 Package = Machine + PB Ø 17, 20, 24, 28, 32, 40, 44, 50, 57, 71+ 237.239.2L2
* According to the fitting.
** Without flange.
*** Intermediate dies not required.

INCLUDED

QDS 239 B

QDC 239.5

STANDARD

CONTROL B+Touch

TA (depht stop)

To position the fittings inside the head and/or to complete the crimp cycle automatically.

OPTIONS

PTS system

Marking and crimping in one step according to
DIN 20066 and EN 853, EN 854, EN 856, EN 857.

PTS 52
Character 4 x 2,0 mm / marking depth ca. 0,3 - 0,5 mm

PTS 32
Character 3 x 1,5 mm / marking depth ca. 0,3 mm

UTS***

UTS enables a comfortable article entry via the PC. The data can be entered in a set MS Excel-sheet and be transferred with UTS to the UNIMATIControl-B + TOUCH. Therefore it is possible to compare the data from a number of machines, provide documentation (date + time), back-tracking and backup in one go. All crimpings can be documented with UTS, especially with the PFM option, which saves the pressure value as additional parameter.

QDS 239 C

Mobile die storage
239 / 239 L (12 or 24 set)
and 232 L (2 or 4 Set).
* C is with only one shelf .
** T is with 2 shelf.

OIL COOLER

Prevent the heating of hydraulic oil.
A constant oil temperature leads to reproducable crimp results.

PFM

PFM (Pressure Force Monitoring) gives you the option to achieve a substantial quality improvement for a comparatively small investment of time and money. And here is how it works...
After each crimp process with the PFM-Option the reached crimp value is shown. Out of these measures the start values for the upper- or lower pressure limit can be determined. During each crimp process the permanently measured crimp value is compared to the entered limits. If this exceeds the set limits, an error message is shown. In the end of the crimp process it is tested once more if the minimal pressure has been reached. In the case of an error the operator has the option to check the work piece thoroughly and to correct any sources of the error.
During a detailed examination with the PFM-option the quality of a production process was increased from 97,8% to 99,7%. 2% of all produced parts had defects and with the UNIFLEX PFM option it was prevented that these defective parts were delivered to customers.